Calculate Your Pavers

Shape
Units
Waste:Base:

Buy about

567

pavers (540 before waste)

Paver base

1.48

cubic yards, about 2.79 US tons

0.37

cu yd bedding sand

7.125

in dig depth

1 to 2

bags joint sand

Bedding sand weighs about 0.5 US tons. Base ranges 2.64 to 2.93 US tons.

Edge restraint: about 44 ft and 23 spikes at 24 in spacing (skip sides that meet a wall or house).

Pavers per sq ft at this size: 4.5. Confirm base depth and stone weight with your supplier.

Optional: thickness, joints, pallets and project cost

Paver patio cost from your prices

Pallet sizes are not standard, so the field starts blank. Nothing is assumed: type the prices from your supplier or quote, and a blank price adds nothing. Materials multiply each price by the quantities above, using the typical stone weight and the higher joint sand bag count. An installer quote is multiplied by the patio area and is not added to the materials total.

Formula and basis

Pavers = area × (1 + waste) ÷ (paver length × width ÷ 144), rounded up

Cubic yards of base or sand = area (sq ft) × depth (in) ÷ 324

Dig depth = base + sand + paver thickness - 1/4 in

Waste is 5% for few cuts and 10% for many (Oregon State Extension). Base weighs 1.78 to 1.98 tons per cubic yard compacted (Wisconsin DOT). Bedding sand is about 2,700 lb per cubic yard dry. Joint sand covers 60 to 120 sq ft per 50 lb bag with narrow joints and 25 to 40 with wide (Techniseal).

Was this helpful?

Your whole garden planned in five minutes: layout, watering, shopping list and every job on a calendar. Try HarvestMath Garden free

Powered by HarvestMath