Calculate Your Fence

Style
Layout
Units

Boards side by side, tight or with a small gap

Spacing:
Actual sizes:

You need about

14

posts (2 for gates)

And about

221

boards, with extra

12

sections

36

rails (3 per section)

53

50 lb concrete bags

9 ft

post length

Each hole: 36 in deep and 10.5 in wide, about 3.7 bags of concrete per post. Fenced length: 96 ft after the gates.

Planning figures. Check local code for height limits, frost depth and permits before you build.

Optional: rails, hole depth and extra boards

Leave rails and depth blank to use the rules below. Extra boards cover cuts, splits and warped stock.

Optional: fence cost from your prices

Type the prices from your store or contractor quote. Nothing is assumed, so a blank price adds nothing. Materials multiply each price by the counts above, and the installed figure multiplies your quote by the fenced length, gates excluded.

Formula and basis

Sections = ROUNDUP(fenced length ÷ post spacing)

Posts = sections + 1 (open run, no gates)

Boards = ROUNDUP((length + gap) ÷ (board + gap))

Gates are taken out of the run and add two posts each. Rails: one per 2 ft of height, at least two. Hole depth is half the fence height, so a third of the post is buried. Hole width is three times the post width. Concrete is filled to 3.5 in below the top at 0.375 cu ft per 50 lb bag.

Was this helpful?

Your whole garden planned in five minutes: layout, watering, shopping list and every job on a calendar. Try HarvestMath Garden free

Powered by HarvestMath